12-11 Section 12 Automatic Sailing (Option)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
付録
Creation of the temporary route to the selected WPT starts.
When the temporary route is created, a completion message and the [Start] button are
displayed.
When a temporary route cannot be created, the following error message is displayed.
Error message Cause Measures
Cannot create the temporary route
because the course is inappropriate.
Turn the course toward the planned
course.
The temporary route
could not be created due
to the inappropriate
course.
Approximate the ship’s
heading to the planned
route.
Cannot create the temporary route
because the XTD exceed XTD MAX.
Move own ship toward the planned
route.
Since XTD is too large,
the temporary route
could not be created.
Approximate own ship to
the planned route.
Cannot create the temporary route
because own ship may pass through
the WOL. Select the TO-Waypoint
again.
Since own ship may
pass through the WOL,
the temporary route
could not be created.
Re-select TO-WPT.
Cannot create the temporary route
because own ship may pass through
the planned route leg. Select the
TO-Waypoint again.
Since own ship may
pass through the
planned route leg, the
temporary route could
not be created.
Re-select TO-WPT.
Memo
Even if the predicted route creation starting condition processing fails, the predicted route is
drawn.
[Start] button
To Next Page
Loading...
