JRC JSS-2500 - Page 132

Settings & Registrations
5-4
4
4
4
.
.
.
To indicate the positioning system and the
type of quality, press the ENT and select
Quality.
 For more details, see 9.3(3).
5
5
5
.
.
.
If changing the priority of the position
sources, set “1. Select source” to Manual
and then edit the Priority1 to 3.
- When Position source is set to Auto, the default setting Priority1:GPS /
Priority2:GLONASS / Priority3:Galileo / Priority4:Other will be set.
- Unchangeable the “Priority4:Other” in the priority setting of the position source.
- For the input port from the positioning system such as GPS, the equipment has
fixed one serial port (NMEA 0183 compliant).
Note
7.2)POS/TIME
1.Own position:NE
89°59.1234'N
179°59.1234'E
2.UTC of position:
23:59
3.State display:Normal
4.Position source set
0.Back
Quality
7.2.4)Position source set
1.Select source:Auto
- Priority1 :GPS
- Priority2 :GLONASS
- Priority3 :Galileo
- Priority4 :Other
0.Back
Manual
7.2.4)Position source set
1.Select source:Manual
- Priority1 :GPS
- Priority2 :GLONASS
- Priority3 :Galileo
- Priority4 :Other
0.Back
GPS