Settings & Registrations
5-18
5.7 Setting of data terminal
The following describes the procedure regarding LCD adjustment, such as the color settings and
brightness, and registration of the station list.
5.7.1 LCD adjustment
■ Procedure ■
1
1
1
.
.
.
If displaying the message of "Press Enter key to get the access right in the NBDP
mode…" on the data terminal, press Enter key on the keyboard.
The operation of the data
terminal becomes possible in
the telex mode, except when
the controller is used.
2
2
2
.
.
.
On the main menu and the dropdown menu, select System Config with Enter key.
The setting conditions
concerning to the screen are
displayed.
3
3
3
.
.
.
Select the item to be changed by the cursor and press Enter key, then input the
appropriate condition.
Set the item using the numeric
keypad or dropdown menu,
where the cursor moves to the
right as shown at right. As for
other items, the specific menu
is displayed.
Config
LCD/LED dimmer (0-15) : 13
LCD/LED dimmer button setting
Screensaver setting
- Function ON/OFF : ON
- Starting time (1-15) : 3 minutes
Display color pattern : Ocean Day
User defined color setting
- Background color of main display: Green
- Text color of main display : White
- Background color of H&F display : Lime
- Text color of H&F display : Navy
- Shortcut character color : Orange
Set Cancel
LCD/LED dimmer
To Next Page
Loading...