Maintenance & Inspection
6-17
6.4.3 Viewing the maintenance information history
The following describes how to view the error information detected by the equipment or a history
of past occurring error in the 6.2 Maintenance information menu.
■ Procedure ■
1
1
1
.
.
.
Press the MENU key, and through hierarchical
menus, select 6.2 Maintenance information.
One of the screens on the right is displayed
depending on whether an error is occurring.
The displayed maintenance
information is formatted as follows.
[Unit Name]: [MI Number], [Information]
2
2
2
.
.
.
To check the maintenance history, press
ENT.
The popup screen at right is displayed,
select OK.
3
3
3
.
.
.
The maintenance history is displayed.
Up to 100 of the latest histories are stored.
If necessary, scroll with the jog dial.
The displayed maintenance history is
formatted as follows.
[Number] [Detection & recovery time] [A: Detection/V: Recovery]
[Unit name]: [MI number], [Information]
(If there are error information)
Note
Note
(If there is no error information)
6.2)Maintenance information
Press ENT to for Mainte history.
No data
6.2)Maintenance information
ATU ：017,ATU lost
TRX ：020,DISP KEY
Press ENT to for Mainte history.
6.2)Maintenance information
Press ENT to for Mainte history.
No data
View Mainte history?
[ OK ]
[Cancel]
Maintena nce INFO history
1.2020-12-31 23:59 A
ATU ：017,ATU lost
2.2020-12-30 20:10 A
TRX :020,DISP KEY
3.2020-06-15 18:05 V
PA :008,RBK overcurrent
4.2020-06-15 15:11 A
PA :008,RBK overcurrent
To Next Page
Loading...