Settings & Registrations
5-6
5.3.3 User key assignments
User key assignment enables the desired menu to be displayed immediately without moving
through the hierarchical menus, and is assignable as follows.
■ Procedure ■
1
1
1
.
.
.
Press the MENU key, and through
hierarchical menus, select 7.3.3 User
key assign.
The screen at right is displayed. If the
desired menu has already been registered,
the cursor is placed on that menu.
2
2
2
.
.
.
Move the cursor to the desired menu to
be registered with the jog dial.
The assignable menus are as follows:
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
DSC non-distress call
DSC drobose call
Editing a distress msg
DSC logs
Radio operation
User channel list
ITU channel list
Receiver
Scan
Transmitter
Maintenance
Self diagnosis
DSC loop
Maintenance information
Software version
Setup
Date & time
(Menu1)
(Menu2)
(Menu3)
(Menu4)
(Menu5)
(Menu5.1)
(Menu5.2)
(Menu5.4)
(Menu5.4.7)
(Menu5.5)
(Menu6)
(Menu6.1)
(Menu6.1.1)
(Menu6.2)
(Menu6.3)
(Menu7)
(Menu7.1)
18.
19.
20.
21.
22.
23.
24.
25.
26.
27.
28.
29.
30.
31.
32.
33.
POS/TIME
My controller
LCD adjustment
Sound
User channels
DSC/WKR condition
Automatic ACK
WKR scanning FRQ
Option
CH dial lock ON/OFF
2182kHz
AM mode
DSC alert setting
Group ID
Inactivity timeout
DSC call list
(Menu7.2)
(Menu7.3)
(Menu7.3.1)
(Menu7.3.2)
(Menu7.4)
(Menu7.5)
(Menu7.5.1)
(Menu7.5.2)
(Menu7.6)
---
---
---
(Menu7.3.3)
(Menu7.5.6)
(Menu7.5.7)
(Menu7.5.8)
3
3
3
.
.
.
Press ENT to complete registration.
After registration, the screen returns to the
previous hierarchical menu as shown at
right.
When the USER key is pressed in the factory default setting, this menu is
immediately displayed.
Note
7.3.3)User key assign
1.DSC non-distress call
2.DSC drobose call
3.Editing a distress msg
4.DSC logs
5.Radio operation
6.User channel list
7.ITU channel list
8.Receiver
7.3)My controller
1.LCD adjustment
2.Sound
3.User key assign
4.Tx meter :PWR
5.Data transfer
6.Menu shutdown :10min
7.CH search ref :40
8.Frequency digits :7 only
To Next Page
Loading...