Specifications
9-16
(4) BAM interface
CAUTION
The terminals of the BAM (Bridge Alert Management) interface and the AME
interface are shared. Therefore, to use BAM alerts, it is necessary to set AME
function OFF and BAM function ON when equipped. If you need to change
the setting, consult with us or our agents.
Interface standard IEC61162-1 compliant
Protocol
4800 bps, start 1 bit, data 8 bit, stop 1 bit
Non-parity
Number of interfaces 1 port
Output sentence
(Device ID =”CT”)
ALC: Cyclic alert list
ALF: Alert sentence
ARC: Alert command refused
Input sentence
ACN:
Alert command
HBT: Heartbeat supervision sentence
To Next Page
Loading...