Operation
4-23
- The function keys available for the edit screen and the content are as follows.
● Group 1
・ F1 ： Insert On/Off ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ Sets the input condition to the insert mode by
pressing it while Insert On is displayed. And sets the
input condition to the overwrite mode by pressing it
while Insert Off is displayed. Current conditions are
indicated on the upper-right corner of the screen.
・ F2 ： Ins_Line ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ Add a line to the line of the cursor position.
・ F3 ： Block ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ Indicates the following block menu.
・ Top-marker of block:
Specifies the cursor position for a starting point
of the block.
・ Bottom-marker of block:
Specifies the cursor position for a ending point
of the block.
・ Remove markers:
Releases the specification of the block.
・ Copy Block:
Copies and pastes the character string specified
in the block onto the cursor position.
・ Move block:
Moves the character string specified in the block
to the line position of the cursor.
・ Delete block:
Deletes the character string specified in the
block.
・ Go to the block:
Moves the cursor to the starting point of the
block.
・ F4 ： Del_Word ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ Deletes the word at the cursor position.
・ F5 ： Del_Line ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ Deletes the line at the cursor position.
・ F6 ：（ N/A）
・ F7 ： Quit ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ Finishes editing without saving the message file.
・ F8 ： Save As ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ Saves the message file with the new name.
・ F9 ： Save & Quit ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ Saves the message file by overwriting and finishes
editing.
・ F10 ： - Others - ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ Assigns the group 2 to the function keys.
● Group 2
・ F1 ： Max Column ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ Specifies the column width of a line.
・ F2 ： Set T
a
b ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ Specifies the tab position on the edit screen.
・ F3 ： Undo_Char ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ Insert the character erased at the end to the cursor
position.
・ F4 ： Undo_Word ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ Insert the word erased with F4 Del_Word to the
cursor position.
・ F5 ： Undo_Line ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ Insert the line erased with F5 Del_Line to the line of
the cursor position.
・ F6 ： Merge File ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ Selects an existing message file to merge to the
message file under the edit.
・ F7 ： Find ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ Searches a specified character string.
・ F8 ： Print_out ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ Prints the message file under the edit.
・ F9 ： Find/Replace ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ Searches a specified character string and replaces it
with another character string.
・ F10 ： - Others - ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ Assigns the group 1 to the function keys.
Note
To Next Page
Loading...