EasyManuals Logo

JRRacing XR2 User Manual

JRRacing XR2
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #10 background imageLoading...
Page #10 background image
Accessing the Model Name
Entry Function
To access the Model Name Entry function, follow the steps
below:
1. Press the MODE and CHANNEL keys at the same time and
hold.
2. Turn on the transmitter power switch to enter the System
Mode.
3. MD1 should now be present on the screen.
4. Press the INCREASE or DECREASE keys to select the cor-
rect letter/number for the first character (flashing).
5. To change the remaining two characters, press the CHAN-
NEL key until the desired character to be changed is flash-
ing.
6. To access the Data Reset function, press the MODE key.
To exit the System Mode, either turn the transmitter power
switch off or press the MODE and CHANNEL keys at the
same time.
Model Name Entry
(System Mode)
The XR-2 allows a three-digit name to be input for each of
the two (2) models available. The current model, with name,
will then be displayed in the Normal display screen. This fea-
ture is useful to help identify different models, setups, etc.
For information on selecting models 1 or 2, please refer to
the Model Select Function (page 13).
10
Accessing the System Mode
To enter the System Mode, press both the MODE and CHAN-
NEL keys at the same time while turning on the transmitter
power switch. By pressing the MODE key, you can now
select either the model name input or data reset functions as
shown here on the System Mode flow chart. Information for
each function is located on the page number listed next to
the function name on the flow chart.
To exit the System Mode, press the MODE and CHANNEL
keys at the same time, or simply turn off the transmitter.
md !
1
md !
1
clr
1
Model Name Entry,
page 10
Flashing character
indicates the character
to be adjusted
Current model
number
Data Reset, page 11
MODE
ENTER
CHANNEL
INCREASE
CLEAR
+–
DECREASE
Press the MODE and
CHANNEL keys at the
same time and hold to
enter the System Mode
Press the CHANNEL
key to select the
character to be
changed
Press the increase or
decrease keys to select
the correct letter/
number to be used
JR XR-2 7/15/99 8:35 AM Page 10

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the JRRacing XR2 and is the answer not in the manual?

JRRacing XR2 Specifications

General IconGeneral
BrandJRRacing
ModelXR2
CategoryRemote Control
LanguageEnglish

Related product manuals