12
Accessing the
Function Mode
To enter the function mode, it’s necessary to first turn on the
transmitter’s power switch. Next, press the MODE key until a
beep is heard. The display will change to show the first func-
tion listed on the Function Mode flow chart as shown below.
Press the MODE key to scroll down through the functions
one by one, as shown in the flow chart. Once the desired
function has been reached, use the channel key to select the
appropriate channel (if applicable). To adjust the values of
the function, simply press the INCREASE (+) or DECREASE
(-) keys until the desired value is displayed on the screen.
md !
1
str
100
fwd
100
TRVADJ.
TRVADJ.
st
0
stm
100
∞
D/R
SB-TRM
th
0
SB-TRM
th
—
REV•NORM
st
—
REV•NORM
Mode Key Channel Key
Model Select, page 13
Travel Adjust, page 14
Steering Rate, page 15
Sub-Trim, page 16
Servo Reversing, page 17
Channel
key
Channel
key
Channel
key
JR XR-2 7/15/99 8:35 AM Page 12
To Next Page
Loading...
