To Next Page

To Previous Page

Model Select

(Function Mode)

The XR-2 has memory for two (2) models. This feature

allows for either two different models to be operated with the

same transmitter (a second receiver and servos must be pur-

chased separately), or one model with two (2) different race

setups.

Accessing the Model Select Function

To access the Model Select function, follow the steps below:

1. Turn the transmitter power switch on.

2. Press the MODE key to access the Function Mode.

3. Press the MODE key until MDL appears on the screen.

4. Press the INCREASE or DECREASE keys to select the

desired model number (1 or 2).

5. Press the MODE key to access the Travel Adjust function.

6. To exit the Function Mode, either turn off the transmitter

power switch or press the MODE and CHANNEL keys at

the same time.

mdl

MODE

ENTER

CHANNEL

INCREASE

CLEAR

+–

DECREASE

Indicates Model

Select fuction

Indicates current

model number

Press the MODE key

until MDL appears on

the screen

Press the INCREASE and DECREASE keys to

select the desired model to be used (1 or 2)

JR XR-2 7/15/99 8:35 AM Page 13

JRRacing XR2 User Manual

Questions and Answers: