Need help?Do you have a question about the JUKI DDL-7000A-7 Series and is the answer not in the manual?
General| Max Stitch Length | 5 mm |
|---|---|
| Needle Type | DB x 1 |
| Needle Size | #9 to #18 |
| Power Consumption | 550 W |
| Motor Power | 550 W |
| Sewing Speed | 5, 000 sti/min |
| Lubrication | Automatic lubrication |
| Thread (upper) | Polyester or nylon thread |
| Thread (lower) | Polyester or nylon thread |
| Lubricating Oil | JUKI machine oil |
Steps for physically installing the sewing machine, connecting the pedal sensor, and wiring.
Procedures for winding bobbins and threading the machine head for sewing.
Instructions for machine lubrication and correctly attaching the sewing needle.
Adjusting thread tension, take-up spring, feed dog height, tilt, and timing.
Adjusting pedal pressure, stroke, connecting rod, and counter knife.
How to power on, start, and stop the sewing machine safely.
Explanation of the control panel keys, display, and various operational functions.
Procedures for setting and using special sewing patterns like reverse feed and overlapped stitching.
How to select and specify various functions and parameters using the control panel.
A comprehensive list of available function settings, their descriptions, and default values.
How to balance stitches for back-tacking to ensure proper seam formation.
Procedure for selecting the machine head type and initializing the machine's data.
Instructions on setting and using the bobbin counter feature.
How to set a password for function lock and prevent unauthorized changes.
Information on connecting USB devices to the machine and warnings regarding current ratings.
A table listing error codes, their descriptions, and recommended correction steps.
To Next Page
