JUKI DDL-7000A-7 Series - Adjusting the Height of the Presser Bar; Threading the Machine Head

󰿿
1) Loosen setscrew
󰿿
, and adjust the presser bar
height or the angle of the presser foot.
2) After adjustment, securely tighten the setscrew
󰿿
.
15. Adjusting the height of the presser bar
16. Threading the machine head
WARNING :
Be sure to turn the power OFF before the following work in order to prevent personal injury due to
unintentional starting of the sewing machine.
WARNING :
Be sure to turn the power OFF before the following work in order to prevent personal injury due to
unintentional starting of the sewing machine.
– 11 –