(1) Reverse feed stitching pattern
Reverse feed stitching at sewing start and reverse feed stitching at sewing end can be separately pro-
grammed.
[Setting procedure of the reverse feed stitching]
1) The reverse feed stitching pattern at the beginning
of sewing can be changed over to "enable / dou-
ble reverse feed stitching / disable" by pressing
.
The reverse feed stitching pattern at the end of
sewing can be changed over to "enable / double
reverse feed stitching / disable" by pressing
. The current setting state of the reverse feed
stitching is displayed on the display section
I
and
J
.
2) Change the number of stitches to be sewn in tar-
get process (A, B, C, D) with
to
.
The number which exceeds 9 is indicated
as follows:
A = 10, b = 11, c = 12, d = 13, E = 14, and F
= 15.
3. Operating procedure of the sewing pattern
I
J
– 21 –
To Next Page
Loading...
