11. Initialization of function setting data
A
– 43 –
The function setting data that are changed arbitrarily by the customer can be stored in memory. The cur-
rent function setting data can be restored to the aforementioned data.
1) Press
under the normal sewing state to
display the function setting screen.
Refer to
"II-4. Setting of functions" p.26
.
Conrm the data with
.
* You may select any function setting number.
2) On the screen that you can operate the function
setting data, keep
held pressed for three
seconds. Then the function setting data being
displayed is saved and the "SAVE" screen (
A
) is
displayed for a moment.
To Next Page
Loading...
Need help?
General
