Screen returns to the previous screen.
[Parameter number]
The screen is shifted to the sewing information display
screen
– 27 –
Example) To change the setting No. P-01 "the maxi-
mum number of revolutions":
Press
to change over to the setting num-
ber display.
Press
to
to select setting num-
ber P-01.
Press switch
to conrm the number
(A)
.
If
is pressed before conrming the data,
the operation being carried out will be cancelled
and the screen will return to the previous screen.
The current set value (maximum number of revo-
lutions) of function setting number P-01 is dis-
played. Change the maximum number of revolu-
tions with
to
and conrm the set
value.
Then, conrm the setting with switch
(B)
.
If
is pressed before conrming the data,
the operation being carried out will be cancelled
and the screen will return to the [Parameter num-
ber] screen.
[Parameter data]
To Next Page
Loading...
