EasyManua.ls Logo

JUKI DDL-8700A-7 - Page 30

JUKI DDL-8700A-7
60 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
– 27 –
Table 2: Mode resetting operation
Mode name
Switch
5
(held pressed for 2
seconds)
Switch
5
(held pressed for 4 sec-
onds)
T
arget No. of pcs. display mode
(F100)
Resets the actual number of pieces
Resets the difference between target
number of pieces and actual number
of pieces
-
T
arget/actual No. of pcs. difference
display mode (F200)
Resets the actual number of pieces
Resets the difference between target
number of pieces and actual number
of pieces
-
S
ewing machine availability rate
display mode (F300)
Resets average availability rate of
sewing machine
Resets average availability rate of sewing
machine.
Resets average pitch time.
Resets average number of revolutions of
sewing machine.
Pitch time display mode (F400) Resets average pitch time Resets average availability rate of sewing
machine.
Resets average pitch time.
Resets average number of revolutions of
sewing machine.
Average number of revolutions
display mode (F500)
Resets average number of revolu-
t
ions of sewing machine.
Resets average availability rate of sewing
machine.
Resets average pitch time.
Resets average number of revolutions of
sewing machine.
Bobbin counter display mode Resets the bobbin counter value
(Note that only the bobbin counter is
immediately reset by pressing
switch
5
.)
-
[Detailed setting of production volume management function (F101, F102)]
When
switch
7
is held pressed (for three sec-
onds) under the target No. of pcs. display mode
(F100) or the target/actual No. of pcs. difference
display mode (F200), the detailed setting of the pro-
duct
ion volume management function can be carried
out.
The setting state of the number of times of thread
trimming (F101) and that of the target achievement
buzzer (F102) can be changed over by pressing
switch
3
or
switch
4
.
The number of times of thread trimming for sewing
one piece of garment can be set by pressing
switch
5
or
switch
6
in the setting state of the number of times of thread trimming (F101).
It is possible to set whether the buzzer sounds or not when the actual number of pieces has reached the tar-
get
volume by pressing
switch
5
or switch
6
i
n the setting state of the target achievement buzzer
(F102).
6
543
721

Table of Contents

Other manuals for JUKI DDL-8700A-7

Related product manuals