Speed control
Faster speed
Slower speed
Faster speed
Slower speed
Thread trimming foot switch
Speed controller
Maximum sewing speed can be freely set by the speed controller.
Foot controller
To run the machine, press the foot controller.
The harder you press, the faster the machine sews.
Speed controller will set the maximum sewing speed.
Pressing harder → faster speed
Pressing weaker → slower speed
“Thread trimming foot switch”
When the heel side of the foot controller is pressed, the threads
are trimmed.
→ It is also possible to cancel this function. (Refer to page 104.)
* Always clean the foot controller.
12
It is important that you do not place any objects on the foot
controller as it may cause injury to the user and may cause
malfunctions.
To Next Page
Loading...
Need help?
General
