JUKI HZL-F series - How to Change Needle Positions

45
When changing the needle position of straight stitch
It is possible to change the needle position with the zigzag width adjusting dial/button.
Turning to the left (- side), the needle moves to the left.
Turning to the right (+ side), the needle moves to the right.
Pushing "-", the needle moves to the left.
Pushing "+", the needle moves to the right.
When changing the stitch length
It is possible to change the stitch length with the stitch length adjusting dial/button.
Turning to the left (- side), the displayed value becomes smaller
and the stitch length becomes smaller accordingly.
T
urning to the right (+ side), the displayed value becom
es larger
and the stitch length becomes larger.
Pushing "-", the displayed value becomes smaller and the stitch
length becomes smaller accordingly
.
Pushing "+", the displayed value becomes larger and the stitch
length becomes larger.
How to change needle positions / How to change the stitch length
F400 / F300
F600
F400 / F300
F600
F400 / F300
F600
F400 / F300
F600