28
Attaching the needle
Needle setscrew
Stopper pin
Hold the needle with its at part
facing away from you.
Removing needle
1. Turn the hand wheel towards you until the needle comes to
the highest position and lower the presser foot.
2.
Turn the needle setscrew towards you 1-2 times and remove
the needle.
Attaching the needle
(The needle cannot be inserted unless it is correctly
positioned.)
Hold the needle with its at part facing away from you, and
insert it fully until it touches the stopper pin.
Securely tighten the needle setscrew.
Screwdriver
1
2
Warning
When changing the needle, turn off the power.
To Next Page
Loading...
