JUKI HZL-F series - One-Point Stitch;Sewing Letters; Preparation before Stitching

91
One-point stitch/sewing letters
(in order to sew a pattern neatly, apply interlining and conduct a test sewing rst.)
Use an iron to attach a fusible interlining to the wrong side of fabric.
* When stitch length becomes too small, the bobbin thread will come out to the
front side of fabric and/or stitches might get stuck. Therefore make sure to conduct
a test sewing beforehand.
Fabric
Preparation before sewing
Pattern No.
One point 01~38
One point 01~33
One point 01~18
Letters
Presser foot
Manual buttonhole presser foot (I)
F600
F400
F300
Attention
Turn off the power before replacing the presser foot.
F600
F400
F300