Sewing end
Stop sewing and push the thread trimming button to trim the threads.
<by thread trimming button>
Push the thread trimming button to trim the threads.
<by foot controller>
Push heel side of the foot controller to trim the threads.
* This function can be cancelled. (Refer to page 104.)
41
Straight stitch
Pattern No.
Direct 1
Presser foot
Standard presser foot (A)
Thread tension
Auto
Sewing start
Pull the needle and bobbin threads under the presser foot to the rear of the
machine and lower the presser foot to start sewing.
Thread trimming
foot switch
This means presser foot is up. Lower the presser foot to start sewing.
Attention
Turn off the power before replacing the presser foot.
To Next Page
Loading...
Need help?
General
