42
When sewing the edge of thick fabrics
Turn the hand wheel and let the needle enter at the position of sewing start.
Push the black button by nger and lower the presser foot. Release the nger
from the black button and start sewing. When the presser foot will be on the
fabric completely, the black button will be disengaged automatically.
When changing the sewing direction
Stop sewing in front of the predetermined position and then continue to sew,
stitch by stitch, by using needle up/down button until the target point. Leave
the needle inside the fabrics and raise the presser foot. With the needle
inside the fabrics change the sewing direction, lower the presser foot and
then start sewing.
* You can also cut the threads by the thread cutter at the face plate cover.
To Next Page
Loading...
