43
Lock stitch after sewing-end
<When start/stop button is used>
After the sewing is nished, push the reverse stitch button. While it is pressed,
the machine will sew reverse and when it is released, the machine will stop
sewing reverse.
* When reverse stitching, the sewing speed is slow.
<When foot controller is used>
The machine will sew reverse at almost the same speed as the normal sewing.
When the reverse stitch button is released, the machine sews straight.
Seam guide line on the throat plate
Align the fabric edge with a seam guide line and sew.
* Numbers on the guide line show the distance in mm and inches between
the center needle position and the guide line.
Numbers, 7, 10 and 20 are millimeter.
Numbers, 1/ 4, 5/ 8 and 1 are inches.
5 mm
On center needle position basis
To Next Page
Loading...
Need help?
General
