67
Inserting zippers
Use the standard presser foot (A) to sew.
Place the fabrics face-to-face. Check the runstitching length and the length
of the zipper to be inserted. Machine baste the zipper onto the fabrics.
Machine basting = zipper opening length + 1 cm
Machine basting ... Stitch length “4”
Fabric (wrong side)
Crotch end
Reverse stitch (1cm)
Runstitching ... Stitch length “Automatic”
Preparation before attaching zipper ии
Pattern No.
Direct 1
Presser foot Zipper presser foot (B)
Zippers are set in two different ways: by inserting into the side seam of the garment and by centering in position.
* Make sure to use center needle position (Stitch pattern No. Direct 1).
Attention
Turn off the power before replacing the presser foot.
1
To Next Page
Loading...
Need help?
General
