Pulling up the bobbin thread
Basic operation:
You can start to sew without pulling up the bobbin thread, however, if you want to sew with the bobbin thread pulled out, follow
the directions below.
Lift the presser foot and lightly hold the end of the needle
thread.
Turn the hand wheel towards you to move the needle up
and down. Loop of bobbin thread will be pulled out
when you will pull the needle thread lightly.
Pull out both needle and bobbin threads by approx. 10 cm
(4 inches) long and pass them under the presser foot
towards the back of the machine.
27
2
3
1
To Next Page
Loading...
