EasyManuals Logo

JUKI HZL-F series Instruction Manual

JUKI HZL-F series
133 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #89 background imageLoading...
Page #89 background image
1
Put top layer of fabric with patchwork and/or appliqué, quilting
cotton and bottom fabric together by using pin or basting
stitches.
It is called free motion quilting when moving the fabrics freely towards any directions without using the feed dog of sewing machine.
When the feed dog is lowered (drop feed condition), it is possible to sew various curves and/or any directions by moving the fabrics by
hands.
Pattern No. Direct 1
Presser foot Quilt presser foot (Q)
Setscrew for presser foot holder
Presser bar
Quilting (free motion)
F600 / F400
Attention
Turn off the power before replacing the presser foot.
88
Presser foot holder
2
Setscrew for presser foot
Assemble the quilt presser foot.
Raise the presser bar. Loosen the setscrew for presser foot holder and
remove the presser foot holder. (Refer to page 16)
Set the quilting foot and tighten the setscrew for presser foot.

Table of Contents

Other manuals for JUKI HZL-F series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the JUKI HZL-F series and is the answer not in the manual?

JUKI HZL-F series Specifications

General IconGeneral
BrandJUKI
ModelHZL-F series
CategorySewing Machine
LanguageEnglish

Related product manuals