87
* To further avoid fabric shifts, set the presser foot pressure lower.
Adjustment of presser foot pressure: Refer to page 33
* If it is necessary to sew with the same distance, use quilt guide.
Quilt guide: Refer to page 75
Setscrew for presser foot
Actuating lever
Needle clamp
Presser bar
2
Assemble the walking foot.
Raise the presser bar. Loosen the setscrew for presser foot holder and
remove the presser foot holder. (Refer to page 16)
Set the actuating lever on the needle clamp and insert the assembling point to
the presser bar and tighten the setscrew for presser foot.
Place your hands to both sides of the presser foot and sew by
pulling the fabrics apart.
* Sew with slow to medium sewing speed.
Assembling point
3
To Next Page
Loading...
Need help?
General
