EasyManua.ls Logo

JUKI HZL-F series - Fabric, Thread and Needle Table

JUKI HZL-F series
133 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
30
Fabric, thread and needle table
Fabric Thread Needle
HA×1
Light-weight materials
Lawn
Silk thread
…………………………………………
No.80,90
Spun thread
………………………………………
No.80,90
No.11
Georgette
Tricot Spun thread
………………………………………
No.60-90
Knit needle
No.11
Wool and synthetic
fabrics
Silk thread
………………………………………………
No.80
Spun thread
……………………………………
No.60
-
90
No.11-14
Medium-weight materials
Cotton and synthetic
fabrics
Spun thread
……………………………………
No.50
,
60 No.11-14
Light jersey
Silk thread
………………………………………………
No.50
Spun thread
……………………………………
No.50, 60
Knit needle
No.11
Ordinary wool and
synthetic fabrics
Silk thread
………………………………………………
No.50
Spun thread
……………………………………
No.50, 60
No.11-14
Heavy-weight materials
Denim Spun thread
………………………………………
No.30-50 No.14-16
Jersey
Silk thread
………………………………………………
No.50
Spun thread
……………………………………
No.50, 60
Knit needle
No.11-14
Coat Silk thread
………………………………………………
No.50 No.11-14
* In general, the same thread is used for both needle and bobbin threads.
* Thin thread and needle will be used for light-weight fabrics and thick thread and needle will be used for heavy-weight materials.
* Check that the combination of needle and thread is OK by trial sewing on the material which will be sewn.
* Knit needle is good for stretchy fabrics (such as knits) and synthetic fabrics.
* Use thread No. 30 - 90.
* When it is difcult to go over an overlapped section, guide the fabric by hand.
* When sewing decorative stitches or letters (Page 36, 38 and 40), use knit needle for better nish.

Table of Contents

Other manuals for JUKI HZL-F series

Related product manuals