89
3
Move the drop feed knob to the right hand side.
Feed dog is now down.
4
Place the fabric underneath the presser foot and lower the presser
foot.
5
Adjust the height of presser foot according to the thickness of the
fabrics by screw. When the height is 1mm from the surface of the
fabrics, it will be easier to move the fabrics without interference.
Screw
1 mm
6
Use both hands to hold the fabrics and move it without letting it
loose. The target stitch length is about 1.5~2.0mm.
7
When free motion sewing is nished, move the drop feed knob
back to the left side.
The feed dog will be up and engaged at the same time as the machine starts to
sew.
To Next Page
Loading...
Need help?
General
