68
Open the seam allowance.
Neatly open the seam allowance. Adjust the back seam allowance so that
it projects 3 mm from the seam. Press with an iron to make a crease. Fit the
crease along the edge of the teeth.
Zipper
Fabric (wrong side)
Zipper opening size
1 cm
Teeth
Slider
0.3 cm / 0,3 cm
Crotch end
Lapped insertion
1
(right) (left)
Attach the zipper presser foot (B) to the machine.
When sewing the left side of the zipper, place the zipper under the right
portion of the zipper presser foot. When sewing the right side of the zipper,
place the zipper under the left portion of the foot.
2
To Next Page
Loading...
Need help?
General
