69
5
cm
0.7 to 1 cm
Basting
Reverse stitches
Basting stitches
Zipper
Fabric (wrong side)
Fabric (right side)
Move up the slider
Sew reverse stitches and sew the right-hand side.
After sewing reverse stitches, set the left hand side of the zipper presser foot
to the zipper teeth. Sew until 5 cm (2 inches) of the zipper end. Undo the
basting stitches and move the slider to the far end of the presser foot.
Then sew the rest of the way.
3
4
Set on left
5 cm
0.3 cm / 0,3 cm
Slider
Sew the zipper tape on the seam allowance from bottom to top.
Fitting the edge of the zipper presser foot along the edge of the zipper teeth,
sew the zipper tape on the seam allowance. At the slider part of the zipper, stop
the machine at 5 cm (2 inches) before the slider. Move the slider to the far side
of the presser foot and sew the zipper until its top end is reached.
Put the fabric over the zipper.
Baste the zipper and set it on the fabric.
* Baste the zipper tape with the fabric with hand basting stitches. Move the slider
to the top of the zipper. Put the fabric over the zipper and perform basting.
2
Set on right
To Next Page
Loading...
Need help?
General
