● When it comes to the sewing end point, push the
reverse stitch button.
Starting
point
Lock stitches
To sew a bartack of the same length again…
when the length of the rst bartack has been memorized,
* If you want to change the memorized length of the
bar tack, please select stitch pattern again.
Turning
point
Start sewing.
Push the start/stop button and the machine starts to sew straight stitches.
When it comes to the turning point push the reverse stitch button.
The machine goes back to the starting point by sewing straight stitches and
then it sews zigzag stitches to the point where the reverse stitch button is
pushed.
When the machine comes to the sewing end point, push the
reverse stitch button.
The machine sews lock stitches and stops.
Reverse stitch button
Start/stop button
66
3
4
5
● When the start/stop button is pushed, the machine starts to sew and
makes a u-turn automatically at the same point as the rst bartack.
To Next Page
Loading...
Need help?
General
