Place a thread spool to the spool pin and a spool cap onto the
spool pin.
There are three types of the spool caps, large, medium and small.
Choose the size of spool cap according to thread spool to be used.
Thread to guide
A
.
Hold the thread end and thread according to the arrow marking.
* Make sure that the presser foot is raised. Otherwise the machine is
not correctly threaded.
Thread the guide
B
from the right-hand side.
* It is easier to thread by pulling thread towards left back side.
25
A
* Check that the thread take-up is correctly threaded.
B
2
Small spool
Spool Cap
Large spool
Spool Cap
3
4
5
To Next Page
Loading...
Need help?
General
