When the needle thread is too strong:
The bobbin thread will be pulled to the front side of the fabric.
Turn the thread tension adjustment dial towards "-1" to "-3".
When the needle thread is too low:
The needle thread will be pulled to the wrong side of fabric. Turn the thread
tension adjustment dial towards "+1" to "+3".
In case a correct tension setting is not obtained, check thread paths for
both needle and bobbin threads.
Needle thread
Bobbin thread
Bobbin thread
Needle thread
Fabric (wrong side)
32
Fabric (wrong side)
Fabric (right side)
Fabric (right side)
To Next Page
Loading...
