5
Stopper pin
Ripper
Pierce a stopper pin at the bartack and open the buttonhole with
a ripper. Be careful not to cut the stitches.
As the numbers of stitches of both right and left lines of buttonhole is
memorized in the sewing machine, the buttonhole of the same size can be
sewn.
* If you want to change the memory, select the stitch pattern once again.
* In the case of a 2-step buttonhole, sewing direction of the left and that of the right side is different.
Due to this and according to fabrics to be sewn, it may be possible that the density of each side looks different.
64
To Next Page
Loading...
Need help?
General
