37
6-5. Setting the pattern thread tension
Needle thread tension for 6 stitches at the sewing start, the portion which is changed over from basting stitch
to zigzag stitch, and the portion of tie stitch at the sewing end can be individually set.
For the user pattern, the needle thread tension can be individually set as desired.
1) Press READY key
to light up SET
READY LED
.
2) Turn ON work PRESSER and WINDER key
to display the shape check screen.
3) Move the work clamp with DATA CHANGE key
. When the point at which the thread
tension can be set is reached, the thread tension
pictograph is displayed.
4) Press the THREAD TENSION key
.
Input the individual thread tension with DATA
CHANGE key
. Then, press the RE-
TURN key
.
5) Repeat the steps 3) and 4) to set thread tension.
6) After the completion of setting of the thread ten-
sion, press RETURN key
or RESET key
. When you press RESET key
, the work clamp travels to the origin and goes
up.
To Next Page
Loading...
