JUKI LK-1900B series - 3. ADJUSTMENT


78

3-1. Selection and conrmation of the sewing patterns
1) The patterns for the belt-loop attaching are from No. 17 to No. 22.
As for the way of operation for setting, checking or changing the sewing pattern, refer to the item
"I.5. OPERA-
TION OF THE SEWING MACHINE (BASIC)" p.16
described in the instruction manual for the LK-1900B.
After setting, make sure of the needle entry point whether or not the needle interferes with the
work clamp foot.
* The calling has been set to ineffective at the time of delivery since the needle interferes with the stan-
dard work clamp foot which has been provided with the machine. When using this function, use “Set-
ting the pattern data calling effective or ineffective” of the memory switch function to make the calling
effective. As for the way of operation for setting, refer to the item
"I.8. HOW TO USE THE MEMORY
SWITCH" p.51
described in the instruction manual for the LK-1900B.
Sewing size is the dimension when
the enlargement rate is 100%.
3-2. Combination of the work clamp foot and the feed plate
Make use of the appropriate combination of the work clamp foot and the feed plate in accordance with the sew-
ing conditions. The combination for the standard delivery and the special order is shown in the following table.
Work clamp footSpec
LK-1902B
Standard
For large size
(Special order part)
For extra large size
(Special order part)
Feed plate
Part No.
13544465
Part No.
14143002
Part No.
13545660
Part No.
13545504
Part No.
13545801
Part No.
13547161
Part No.
13547005
17
18

19

20

21

22
Crosswise
10
10
25
25
25
35
21
28
28
36
42
42
Lengthwise
0
0
0
0
0
0
Pattern No.
Number of stitches
Sewing size (mm)
WARNING :
In case of using an exclusive work clamp foot, make sure of the shape of the sewing pattern. If the
sewing pattern extends outside the work clamp foot, the needle interferes with the work clamp foot
during sewing, resulting in the danger of the needle breakage or the like.
WARNING :
In case of using an exclusive work clamp foot, make sure of the shape of the sewing pattern. If the
sewing pattern extends outside the work clamp foot, the needle interferes with the work clamp foot
during sewing, resulting in the danger of the needle breakage or the like.
37.4
2.8
37
10
27.4
2.8
24.8
10
37
2.4
7
27
2.4
7
17
2
7
3. OPERATION OF THE SEWING MACHINE