– 138 –
Setting the pattern function
1) Set the pattern function using buttons
.
Refer to
"5-2. Sewing patterns" p. 45
.
2) Press
.
The "sewing pattern number registration
screen" is displayed.
Press
to display the data discard
conrmation screen.
<New sewing pattern edit screen>
Entering a pattern number and registering the pattern
1) Enter the sewing pattern number to be regis-
tered using numeric keypad
.
An unassigned registration number that is
closest to the entered value in the plus/minus
direction is displayed by pressing
.
2) The created pattern is registered by pressing
. Then, the current screen returns
to the "sewing pattern number list screen".
In the case the entered number has already
been registered, the prompt message for
overwrite conrmation is displayed.
<Sewing pattern number registration screen>
To Next Page
Loading...
Need help?
General
