JUKI LZ-2290C-F - Correction of the Presser Foot Pressure

– 31 –
4-3-2. Correction of the presser foot pressure
Presser foot pressure can be set according to
the sewing speed. (This adjustment e󰀨ectively
prevents jumping of the presser foot.)
[How to change]
1) Display the sewing data edit screen by press-
ing 󰿿.
2) Press
󱀀
to display the presser foot
presser correction function selection screen.
3) Select the status (enable/disable) of the press-
er foot pressure correction function using
󱀁
or
󱀂
. When you have select-
ed "enable", the presser foot pressure correc-
tion screen is displayed by pressing
󱀃
.
The standard presser foot pressure for the
sewing speed of 1000 sti/min is taken as 100
%. The presser foot pressure can be changed
for the sewing speed of 3000 sti/min, 4000 sti/
min and 5000 sti/min.
󱀁 󱀂
󰿿
󱀃
󱀀