– 149 –
8-3-2. Editing the continuous sewing pattern
Displaying the sewing screen (maintenance personnel mode) for the continuous sewing pattern
1) Press
on the sewing screen under
the maintenance personnel mode.
The "Continuous sewing step edit screen" is
displayed.
<Sewing screen (Maintenance personnel mode)>
The number of steps of and the step-by-step conditions for the continuous sewing pattern are changed fol-
lowing the steps of procedure described below.
<Continuous sewing step edit screen>
Editing the number of steps of and the step-by-step conditions for the continuous sewing pattern
2) Step changeover condition is displayed in
.
Press
to place the number of stitches in
the selected state.
The screen returns to the previous one or
advances to the next one with
.
3) When the selected step is pressed again, the
"Sewing shape selection screen" is displayed.
4) Select sewing shape
.
The screen returns to the previous one or
advances to the next one with
.
5) When
is pressed, the operation is
conrmed. Then, the screen returns to the
"Continuous sewing step edit screen".
<Sewing shape selection screen>
To Next Page
Loading...
Need help?
General
