– 73 –
5-2-8. One-touch utility changeover function
In the case the one-touch changeover function is assigned to the custom switch, the stitch length, sewing
speed, etc. can be changed over by pressing the custom switch.
* The one-touch function has been factory-allocated to the machine head switch 1 at the time of shipment.
Data that is changed over with the one-touch changeover function
・
Sewing speed
・
Stitch length
・
Needle thread tension
・
Feed locus
・
Feed dog height
・
The number of stitches to be sewn before turning OFF the changeover function
Refer to
"4-8. Custom switch" p. 35
.
While the one-touch type changeover is being
carried out, the object data display is changed,
and the one-touch type changeover icon is dis-
played on
.
During one-touch type changeover
To Next Page
Loading...
Need help?
General
