– 176 –
8-11. Key customization
8-11-1. Assignable data
It is possible to register a desired function to a key to customize the peel key arrays. Functions that can be
assigned to panel keys are as described below.
The key to which no function is assigned is displayed in blank.
<Sewing screen (Operator mode)> <Sewing screen (Maintenance personnel mode)>
<Sewing screen (Cycle mode)>
Initial value
Assignable data
Operator mode
Maintenance personnel
mode
Cycle mode
Counter Counter Counter Pattern data
Pattern number
Cycle pattern number
Memory switch
One-touch changeover
One-touch type changeover
(multi-layered portion)
Bobbin winding mode
Counter
Second sewing screen
Function is not provided
Sewing speed Sewing speed Sewing speed Pattern data
Pattern number
Cycle pattern number
Memory switch
One-touch changeover
One-touch type changeover
(multi-layered portion)
Bobbin winding mode
Second sewing screen
Function is not provided
Needle thread tension Needle thread tension Needle thread tension
Zigzag width Zigzag width Zigzag width
Stitch baseline position
(other than the straight
stitch)
Stitch baseline position
(other than the straight
stitch)
Stitch baseline position
(other than the straight
stitch)
Second sewing screen Stitch length Second sewing screen
Sewing data list
Second sewing screen
To Next Page
Loading...
