– 156 –
<Registered cycle pattern selection screen
(In numerical order)>
3) Press Pattern No.
you want to create.
4) When
is pressed, the operation is
conrmed. Then, the screen returns to the
"new cycle sewing pattern edit screen".
<Cycle sewing pattern edit screen>
5) The selected pattern is added to cycle sewing
data with suxed.
Create the cycle sewing data by repeating
steps 2) to 5).
6) Press
to display the data discard
conrmation screen.
7) When
is pressed, the "cycle sewing
pattern number registration screen" is dis-
played.
<Cycle sewing pattern number registration screen>
8) Enter the sewing pattern number to be regis-
tered using numeric keypad
.
An unassigned registration number that is
closest to the entered value in the plus/minus
direction is displayed by pressing
.
9) The created pattern is registered by pressing
.
Then, the current screen returns to the "sew-
ing pattern number list screen". In the case
the entered number has already been reg-
istered, the prompt message for overwrite
conrmation is displayed.
To Next Page
Loading...
Need help?
General
