– 173 –
Setting the data number and starting communication
1) Press data number button
.
The "data number input screen" is displayed.
<Data transmission/receipt preparation screen>
2) Enter the source/destination data number
with numeric keypad
and
.
Press
to conrm the setting.
The "data transmission/receipt preparation
screen" is displayed.
<Data transmission/receipt preparation screen>
<Data number input screen>
3) Conrm the numeric value with
to
start communication.
"During communication" screen is displayed
while the communication is being carried out.
Cancel the operation with
. The cur-
rent screen returns to the previous screen.
* If the destination number you have entered
has already been registered, the "overwrite
conrmation message" screen will be dis-
played.
To Next Page
Loading...
