– 178 –
Selecting a function to be assigned
When one of the buttons
to
(
to
for the
operator mode or cycle mode), the "Key customi-
zation selection screen" is displayed.
<Key customization assignment screen (Operator mode)>
<Key customization assignment screen
(Maintenance personnel mode)>
<Key customization assignment screen>
1) Press
to select the function. Then,
press the target function button
to allocate
the function to
to
(
to
for the oper-
ator mode or cycle mode).
2) The counter button is respectively displayed
by pressing
.
3) Press
to conrm the setting.
Cancel the operation with
. The cur-
rent screen returns to the previous screen.
<Key customization assignment screen (Cycle mode)>
To Next Page
Loading...
Need help?
General
