– 38 –
1) When
is held pressed for three
seconds on the sewing screen, the "Mode
screen" is displayed.
2) Select the "1. Memory switch".
The "memory switch type selection screen" is
displayed.
<Mode screen>
<Memory switch type selection screen>
3) Select the "1. Display all".
The "memory switch edit screen" is displayed.
4) Select "K204 Setting of mirror function" by
pressing
.
5) Select "1: Pattern mode" or "2: Continuous
mode" by pressing numeric key
.
* The initial value has been set to "2: Continu-
ous mode".
6) Press
to confirm the setting.
The "memory switch edit screen" is displayed.
<Memory switch edit screen>
To Next Page
Loading...
