JUKI LZ-2290C-F - Page 65

– 60 –
Data
No.
Item name
Unit of
change
Input range
Reverse feed stitching at the end of sewing
S030 Reverse feed stitch-
ing ON/OFF at the
end of sewing
―
ON / OFF ― ON / OFF
S031 Shape of reverse
feed stitching at the
end of sewing
―
: Normal conden-
sation stitch
: 2-point condensa-
tion stitch
: Condensation
custom
―
: Normal conden-
sation stitch
: 2-point condensa-
tion stitch
: Condensation
custom
S032 Custom stitching at
the end of sewing
― Condensation custom No.1 to
20
―
Condensation custom No.1 to
20
S033 Number of stitches
C
1 stitch
0 to 99
S034 Number of stitches
D
1 stitch
0 to 99
S035 → Number of stitch-
es C, stitch length
(reverse feed)
0.1 mm -5.0 to 5.0
/ Common
setting S005
―
-5.0 to 5.0
/ Common
setting S005
S036 → Number of stitch-
es D, stitch length
(normal feed)
0.1 mm -5.0 to 5.0
/ Common
setting S004
―
-5.0 to 5.0
/ Common
setting S004
S037 → Stitch length 2 at
end of sewing
0.1 mm -5.0 to 5.0
/ Common
setting S009
―
-5.0 to 5.0
/ Common
setting S009
S039 → Reverse feed
stitching speed at
the end of sewing
50 sti/min
150 to 2000 ― 150 to 2000
S040 → Needle thread
tension Common
setting ON/OFF
―
: OFF
: ON
―
: OFF
: ON
S041 → Needle thread
tension
1
0 to 200 ― 0 to 200
S043 → Sewing-end con-
densation custom
stitch width
0.1 mm
0.0 to 10.0 ― 0.0 to 10.0
S044 → Sewing-end
2-point condensa-
tion stitch width
0.1 mm
0.0 to 10.0 ― 0.0 to 10.0
S050 Needle bar stop
position
―
：
Stop with the
needle up
：
Stop with the
needle down
―
：
Stop with the
needle up
：
Stop with the
needle down
S051 Wiper ON/OFF ―
: OFF : ON