– 79 –
・
Enter the zigzag width with numeric keypad
. (0.0 to 10.0)
・
When
is pressed, the entered value
is conrmed and the screen is returned to the
"Sewing screen".
[Setting of the position of stitch base line]
・
Press
on the sewing screen.
The "Stitch baseline input screen" is dis-
played.
・
Enter the stitch baseline position with numeric
keypad
. (-5.0 to 5.0)
・
When
is pressed, the entered value
is conrmed and the screen is returned to the
"Sewing screen".
[Setting the stitch length]
・
Press
on the sewing screen.
The "Stitch length input screen" is displayed.
・
Enter the stitch length with numeric keypad
. (-2.5 to 2.5)
・
When
is pressed, the entered value
is conrmed and the screen is returned to the
"Sewing screen".
<Zigzag width input screen>
<Stitch baseline input screen>
<Stitch length input screen>
5) Setting of the position of sewing start.
・
Press
on the sewing screen.
The "Sewing data edit screen" is displayed.
<Sewing screen>
To Next Page
Loading...
Need help?
General
