– 82 –
Normally, scallop starts
the sewing with the
pattern of start from
root. However, start from
crest can be selected by
changing the setting.
Start from crest and start from root of scallop
Start of sewing
Needle position
after thread
trimming
Start from
root
Start from
crest
<Scallop stitch stop position selection screen>
・
Select the scallop stitch end position
.
: Sewing starting position, optional
: Sewing starting position, bottom
: Sewing starting position, apex
・
When
is pressed, the entered value
is conrmed and the screen is returned to the
"Sewing data edit screen".
4) Setting the sewing end position.
・
Press
on the sewing data edit
screen "Scallop stitch stop position selection
screen" is displayed.
Refer to
"4-9. Mirror stitching" p.
37
for the mirror stitching.
<Sewing data edit screen>
To Next Page
Loading...
