– 4 –
If the sewing machine is operated with-
out removing air vent cap
, oil leakage
from gear box portion
may occur.
3) Remove air vent cap
attached to the machine
bed. (Be sure to attach cap
when transporting
the machine head in the state that the machine
head is removed from the machine table.)
Do not hold the handwheel.
4) Fit hinge
into the opening in the machine bed,
and t the machine head to table rubber hinge
before placing the machine head on cushions
on the four corners.
5) Attach head support rod
to the machine table.
To Next Page
Loading...
